This article show a guide on how to update BMW 5 and 7 series (E60,E61,E65,E66) DVB-T for advanced DVD system.The installation time is approx 1.0 to 1.5 hours, but this may vary depending on the model the condition of the car and the equipment in it.
BMW 7 E65/E66 745i 7 E65/E66 745Li Repair manuals English 702 KB GA6HP26Z AUTOMATIC TRANSMISSION Model: E65 - 745i / E66 - 745Li Engine: N62B44 Production Date: 11/2001 - E65, 01/2002 - E66.
And for more BMW retrofit,you can check here:BMW Retrofit Projects
Retrofit kit No.
65 12 0 415 063 DVB-T upgrade kit for Advanced DVD system E60
65 12 0 415 064 DVB-T upgrade kit for Advanced DVD system E61
65 12 0 415 065 DVB-T upgrade kit for Advanced DVD system E65, E66
Note:These installation instructions are only applicable to cars with Advanced DVD system.
Important information
These installation instructions are primarily designed for use within the BMW dealership organisation and by authorised BMW service companies.
In any event the target group for these installation instructions is specialist personnel trained on BMW cars with the appropriate specialist knowledge.
All work must be completed using the latest BMW repair manuals, circuit diagrams, servicing manuals and work instructions in a rational order using the prescribed tools (special tools) and observing current health and safety regulations.
To avoid unnecessary extra work and/or costs, if any installation or function problems occur, after a brief troubleshooting session (approx. 0.5 hours), contact the following:
1.Either your national subsidiary or your regional office
2.The Support team via the Aftersales Assistance Portal (ASAP) using the optional technical parts support application.
Specify the chassis number and the part number of the installed retrofit kit and give a precise
description of the problem.
Do not archive the hard copy of these installation instructions since daily updates are made by ASAP.
Pictograms
Denotes instructions that draw your attention to dangers.
Denotes instructions that draw your attention to special features.
Denotes the end of the instruction or other text.
Subject to technical modifications!
Installation information
Ensure that the cables/lines are not kinked or damaged as you install them in the car.
The costs incurred as a result of this will not be reimbursed by BMW AG.
Additional cables/lines that you install must be secured with cable ties.
If the specified PIN chambers are occupied, bridges, double crimps or twin-lead terminals must be used.
All the figures show LHD cars, proceed in exactly the same way on RHD cars.
List of special equipment
The following special equipment must be taken into consideration when installing the upgrade kit:
SA 653 I-BOC
Special tools required
00 9 317, Trim wedge
Contents
1.Parts list
Legend
Only the parts required for the electrical connection of the set-top box are listed. All the other parts contained
in the kit are described in the installation instructions headed “DVB-T set-top box”.�
A Retrofit cable (for E61, E65 and E66 cars)
B Retrofit cable (for E60 cars)
C Cable tie (10x)
2.Connection diagram
Legend
The connections for branches A1/B1 and A2/B2 are described in the installation instructions headed “DVBT
set-top box”.
A/B Retrofit cable
A1/B1 26-pin socket casing SW
A2/B2 6-pin socket casing SW
A3/B3 8-pin round plug, SW
A4/B4 WS 3-pin socket casing
A5/B5 WS 3-pin plug casing
1 AV switcher
2 Voltage supply
3 Multimedia changer
4 WS 3-pin plug casing
5 WS 3-pin socket casing
6 Set-top box
3.Installation and cabling diagram for E60 cars
Legend
B Retrofit cable
1 Set-top box
2 Voltage supply
3 AV switcher
4 Multimedia changer
4.Installation and cabling diagram for E61 cars
Legend
A Retrofit cable
1 Set-top box
2 Voltage supply
3 AV switcher
4 Multimedia changer
5.Installation and cabling diagram for E65 and E66 cars
Legend
A Retrofit cable
1 Set-top box
2 Voltage supply
3 AV switcher
4 Multimedia changer
6.To connect the retrofit cable for E60 cars
Disconnect plugs (1 and 2), 3-pin WS for the voltage supply to the multimedia changer (3).
Connect branch B4, 3-pin WS socket casing, to plug (2).
Connect branch B5, 3-pin WS plug casing, to plug (1).
Insert the multimedia changer (3) into the holder (2) and secure it with screws (1).
Undo hexagonal nuts (1 and 2) on the AV switcher (3).
Route branch B3, 8-pin round plug, to the AV switcher (1) and connect it to the same colour mating plug.
Secure AV switcher (1) in the car.
Secure the retrofit cable to the standard wiring harness using cable ties C.
7.To connect the retrofit cable for E61 cars
Cars without SA 653 only
Release the multimedia changer (1).
Undo the holder (2) and tilt it inwards.
Route branch A3, 8-pin round plug, along the standard wiring harness to the AV switcher (1) and connect it to the same colour mating plug.
Secure the holder (3) in the car.
Secure the multimedia changer (1) with screws (2).
Cars with SA 653 only
Route branch A3, 8-pin round plug, along the standard wiring harness to the AV switcher (1) and connect it to the same colour mating plug.
7.To connect the retrofit cable for E61 cars
All cars
Disconnect plugs (1 and 2), 3-pin WS for the voltage supply to the multimedia changer (3).
Connect branch A4, 3-pin WS socket casing, to plug (2).
Connect branch A5, 3-pin WS plug casing, to plug (1).
Secure the retrofit cable to the standard wiring harness using cable ties C.
8.To connect the retrofit cable for E65 and E66 cars
Release the multimedia changer (3).
Disconnect plugs (1 and 2), 3-pin WS for the voltage supply to the multimedia changer.
Connect branch A4, 3-pin WS socket casing, to plug (2).
Connect branch A5, 3-pin WS plug casing, to plug (1).
Insert the multimedia changer (1) and secure it.
Route branch A3 to the AV switcher (1) and connect it to the same colour mating plug.
Secure the retrofit cable to the standard wiring harness using cable ties C.
9.Concluding work and coding
This retrofit system does not require coding.
– Connect the battery
– Conduct a brief test
– Conduct a function test
– Re-assemble the car
10.Circuit diagram
Legend
A1*/B1* 26-pin socket casing SW
A2*/B2* 6-pin socket casing SW
A3*/B3* 8-pin round plug, SW
A4*/B4* WS 3-pin socket casing
A5*/B5* WS 3-pin plug casing
1* AV switcher
2* Set-top box
All the designations marked with an asterisk (*) apply only to these installation instructions or this circuit diagram.
Cable colours
BL Blue
BR Brown
GE Yellow
GN Green
RT Red
SW Black
Bmw E65 E66 Navigation Dvd Download Forum Mac
WS White
Navigation Dvd Mercedes
Readers who read this article also read:
06-27-2008, 03:17 AM | ||
| ||
Navigation V32 SIB SIB 652102 SI B65 21 02 Audio, Navigation, Monitors, Alarms, SRSJune 2008 Technical Service This Service Information bulletin supersedes SI B65 21 02 dated March 2008. designates changes to this revision SUBJECT Navigation System Operating Software MODEL E38 (7 Series) E39 (5 Series) E46 (3 Series) E53 (X5) E83 (X3) E85, E86 (Z4) E65, E66 (7 Series) INFORMATION With the introduction of the navigation system operating software V32, there are currently 2 valid versions of navigation software:
Navigation system operating software should be updated under the following circumstances:
NAVI03 and DVD-Top NAV system-improved software for:
No new features FEATURES INTRODUCED WITH PRIOR NAVIGATION SOFTWARE V31 AND V30 No new features FEATURES INTRODUCED WITH PRIOR NAVIGATION SOFTWARE V29 Destination input screen text changes:
E83, E85, and E86 - software fix for the following display/flap issues:
Only E46 (3 Series), E53 (X5), E83 (X3), E85 (Z4) with the DVD-Top navigation system:
E65, E66 (7 Series) DVD NAVI03 (from 03/05): Destination input when 'Country' (United States or Canada) is selected via:
Phone: 1-888-navteq9 (628-8379) Email: [email protected] FEATURES INTRODUCED WITH PRIOR NAVIGATION SOFTWARE V26
CHECKING THE SOFTWARE VERSION MK I Systems The software version is shown in the top right corner of the 'setting' screen. The software/hardware version is displayed as '1-1/80'. The numbers have the following meanings: the first digit, 1, is a 1st generation navigation system (MK I); the second digit, 1, is a 1st device variant (top navigation – MK Ic color screen); the last two digits, 80, are the software version of the graphic component (8.0). MK II Systems The software version is shown in the top right corner of the 'setting' screen. The software/hardware version is displayed as '2-1/81'. The numbers have the following meanings: the first digit, 2, is a 2nd generation navigation system (MK II); the second digit, 1, is a 1st device variant (top navigation – MK IIc color screen); the last two digits, 81, are the software version of the graphic component (8.1). MK III Systems The software version is shown in the top right corner of the 'setting' screen. The software/hardware version is displayed as '3-1/63' or '3-2/63' (MK III with split screen). The numbers have the following meanings: the first digit, 3, is a 3rd generation navigation system (MK III); the second digit, 1, is a 1st device variant (top navigation – MK IIIc color screen), or 2 is a 2nd device variant (radio navigation – MK IIIm monochrome display); the last two digits, 63, are the software version of the graphic component (6.3). DVD-Top navigation system for I-Bus vehicles The software version is shown in the top right corner of the 'setting' screen. The software/hardware version is displayed as '4-1/00'. The numbers have the following meanings: the first digit, 4, is a 4th generation navigation system (DVD); the second digit, 1, is a 1st device variant (top navigation – DVD color screen); the last two digits, 00, are the software version of the graphic component (10.0). E65 and E66 Systems
Software version Application 8.0 MK I - E39, E38 (up to 9/97) 8.1 MK II - E39, E38 (from 9/97), E46, X5 9.0 MK II - Radio Navigation – E52 (Z8) 5.1 MK III Radio Navigation – E52 (Z8) from 09/00 3.1* MK III w/o Split Screen -E46 from 06/00, E39,E38 from 09/00, E53 from 10/00 6.3 MK III with Split Screen 10.0 DVD-Top Navigation 7.3.2 E65, E66 NAVI01 (CD-drive) 8.4.4 E65, E66 NAVI02 (DVD-drive) 09.08.02 E65, E66 NAVI03 (DVD-drive) *Included in navigation software CD V17.1 LOADING SOFTWARE (ALL EXCEPT THE E65 AND E66) For MK I, MK II, MK III, and DVD-Top NAV systems (except for the E65 and E66), use the following software loading instructions:
Mark II System (from 9/97 production) Mark III System (E46 from 06/00 and E38, E39, and E52 from 09/00 production) DVD-Top navigation system (E46, E39, E52 from 09/02 and E53, E85 from 10/02 production): After a few seconds, a menu of notes on the loading procedure and the 'Progress' bar appear on the board monitor. When the loading process has been completed, the message 'Software has been successfully loaded' is displayed.
When programming any E65 or E66 using Progman V27.0 or higher, you will be prompted by the Progman screen that the 'BMW navigation CD' must be loaded prior to programming the vehicle. Note: Connect an approved battery charger before loading the software.
When replacing a defective MK III or DVD NAV computer, a configuration signal is required to allow the new computer to load the correct software for its respective application. This is generated by using the SSS (Software Service Station) loaded with the latest Progman version, and the navigation system operating software CD V17.1 or V32.
The following problems may occur during the software loading procedure:
Part Number Description 01 59 9 789 299 Navigation Software CD V17.1 Index 'x' 01 59 0 141 891 Navigation Software CD V32 Index 'y' Copies of NAV SW CD V32 will be shipped to every BMW Center through the Automatic Tool Shipment Program. WARRANTY INFORMATION Updating the vehicle at the customer's request is not covered under warranty. Last edited by X5 Meister; 05-20-2009 at 05:17 AM. |
Bmw E65 E66 Navigation Dvd Download Forum 2017
Jaguar Navigation Dvd
Sponsored Links |